SM231-4EACV
Módulo de 4E analógicas, 0-10V, 0-5V, +/-5V, +/-2,5V, 0-20 mA, 12 Bits
Performance Parameters
Physical Features CTH2 231-0HC32 | |
Dimension(W×H×D) | 71.3×96×62mm |
LED indicator | 24V Power supply Good: ON = no fault, OFF = no power |
Power Consumption | |
+5VDC power loss | 87mA |
L+ | 17mA |
L+Coil voltage range | 20.4~28.8VDC |
Power Consumption | 2W |
Analog input features | |
Input number | 4 |
Isolated(field side to logical circuit) | Optical isolation:500VAC,1 minute |
Input type | differential input |
Voltage range | |
Voltage input(unipolarity) | 0~10V, 0~5V |
Voltage input(bipoliarity) | ±5V,±2.5V |
Current input | 0~20mA |
Data format | |
Unipolarity,full scale | 0~32000 |
Bipoliarity,full scale | -32000~32000 |
Resolution ratio input | |
Voltage input(unipolarity) | 2.5mV(0~10V);1.25mV(0~5V) |
Voltage input(bipoliarity) | 2.5mV(±5V);1.25mV(±2.5V) |
Current input | 5μA(0~20mA) |
Transfer time | Less than 300μs |
Analog input response time | 1.5ms |
Common mode rejection | 40dB,DC 60Hz |
Common mode voltage | voltage of sensor signal+common mode voltage(less than or equal to 12V) |
Input impedance | No less than 10MΩ |
Max.voltage input | 30V |
Max.current input | 30mA |
Physical Features CTH2 231-5HF32 | |
Dimension(W×H×D) | 71.3 × 96 × 62mm |
LED indicator | 24V Power supply Good: ON = no fault, OFF = no power |
Power Consumption | |
+5VDC power loss | 87mA |
L+ | 50mA |
L+Coil voltage range | 20.4~28.8VDC |
Power Consumption | 2.5W |
Analog input features | |
Input number | 8 |
Isolated(field side to logical circuit) | Optical isolation |
Input type | differential input |
Voltage range | |
Voltage input(unipolarity) | 0~10V, 0~5V |
Voltage input(bipoliarity) | ±2.5V(channel 0~7) |
Current | 0~20mA(channel 6~7) |
Data format | |
Unipolarity,full scale | 0~32000 |
Bipoliarity,full scale | -32000~32000 |
Resolution ratio input | |
Voltage input(unipolarity) | 2.5mV(0~10V);1.25mV(0~5V) |
Voltage input(bipoliarity) | 2.5mV(±5V);1.25mV(±2.5V) |
Analog to digital conversion time | 10ms |
Eight channel switching time | 100ms |
Common mode rejection | 40dB,DC – 60Hz |
Common mode voltage | -12V≤voltage of sensor signal+Common mode voltage≤+12V |
Input impedance | voltage:≥2MΩ
current:250Ω |
Max.voltage input | 30VDC |
Max.current input | 32mA |
A/D conversion resolution | unipolarity:12bit;bipoliarity:11bit+sign bit |
measurement error | 0.5%(max) |
Isolation(Isolated(field side to logical circuit)
) |
500V AC |
Analog input addressing | AIW addressing |
También te puede interesar…